BUILDING A  PLYWOOD GP35 - PAGE 3
MARCH 4-6, 2014
[previous page]
[home]
BASIC PAINTING
LOVE'S LIGHT - That's the name of the yellow color, from Ace Hardware.  
The yellow was brushed on and given two coats, then after 24 hours, time for
masking.
LEFT REAR CAB STEPS - After measuring (measure twice, cut once), I ripcut a groove in a piece of
2x4, ripcut a 1x3 to match, cut them to length, glued them together, and added a piece of 4 mm plywood.
The side windows were a little too large, so I masked them again, and sprayed.
Side windows seem to fit a little better now...not perfect, but close enough!
VISIONARY BLUE - that's the name of the blue color, using Sears
Weatherbeater Ultra Satin.  Most of it looked good with just one coat, but it
got two coats.
TWO MORE VIEWS OF THE CALVERT CENTRAL PAINT SCHEME.
In case you need a reminder, these are the colors of the University of Delaware!
[next page]