BUILDING A PLYWOOD GP35 - PAGE 2
APRIL 3, 2014
DYNAMIC BRAKE BLISTERS - From a knot-free section of 2x4 I cut a 25 inch piece, then ripcut it at a 30-degree
angle.  I used the same angle for the diagonals at the ends.  Then I ripcut a small section at 90 degrees.  After some fitting and
filing, I mounted it to the roof.  The roof is removable, so the brake blisters will stay with the roof section when it is removed.
HOUSING FOR TRACTION MOTOR VENT
PAINTING OF THE CAB FRONT
[home]
[previous page]
[next page]